5" Small Hole
5" Small Hole
No products were found matching your selection.
- Home
- Products
- Aluminum Coil
We stock a wide variety of sizes and gauges of heavy duty aluminum gutter coil, downspout coil, trim coil, and flashing coil. Our aluminum coils are made from 3105 alloy with gauges ranging from .0175 – .032 thickness, widths from 10.5″ – 18″, and painted one of our 21 available colors. Our painted aluminum coil is designed for every type of gutter application, ranging from residential to commercial installations. All coils are packed with protection in mind by utilizing boxes, bands, cardboard, or shrink wrap to preserve the integrity of the coil. Prior to factory painting of our coil, the aluminum receives a special cleaning process to insure maximum adhesion. All of our accessories also have the same finish to ensure that our Limited Lifetime Warranty covering our products is applicable.- Gutter Coil
Our gutter coil is available in .027 x 11 3/4″ and .032 X 11 ¾” for 5″ gutter, .027 x 15″ and .032 x 15″ for 6″ gutter and .032 x 18″ for 7″ gutters. All full and partial rolls range in weight from 200 to 450 pounds. Each roll is wrapped in cardboard and bound with plastic banding before shipping for added protection. - Mini / Jr Coils
Mini rolls and Junior rolls are prepackaged gutter coil that have been spun down to make easy-to-handle, convenient, ready-to-ship coils. Our 027 X 11 ¾ and 032 X 11 ¾ Mini rolls are 150ft per roll and the Junior rolls are 75ft per roll, intended for 5” gutters. Our .027 X 15 and .032 X 15 Mini rolls are 120ft per roll and the Junior rolls are 75 ft per roll, intended for 6” gutter. All rolls have a 12” center. - Downspout Coil
- Flashing Coil
Our flashing coil is available in .019 gauge aluminum and carries a width of 2.25”. - Trim Coil
Trim Coil is available in 24” and some limited quantities available in 13.75” and 18.75”. We will no longer be stocking trim coil in 13.75” or 18.75” once current inventory has depleted, but can be made upon special request for a fee and a minimum box requirement. All trim coils have a smooth finish. All 24” trim coil have two-side paint with most carrying Low Gloss White on the back, but note that slower moving colors may carry a different stock color on the reverse.
- Gutter Coil
- Downspout
Downspouts are available in 2×3, 3×4, and 4×5 sizes. Our 2×3 downspouts are manufactured from .019 gauge aluminum and the downspouts are packaged in standard lengths of 8′, 10′, and select 11′. Our 3×4 downspouts are manufactured in both .019 and .024 gauge aluminum. The downspouts are packaged in standard lengths of 10’, with select 8’ and 11’ options available in .019 or .024 gauge aluminum. Our 4” x 5” downspouts are manufactured from .027 gauge aluminum and come in standard 10’ lengths. Other lengths of downspout available by special request, but will be subject to minimum box requirements and an additional fee. All of our downspouts are individually wrapped in paper to prevent damage in transit.- 2×3″ Downspout
Our 2×3 downspouts are manufactured from .019 gauge aluminum and the downspouts are packaged in standard lengths of 8′, 10′, and 11′. Other lengths of downspout available by special request, but will be subject to minimum box requirements and an additional fee. All of our downspouts are individually wrapped to prevent damage in transit. - 3×4″ Downspout
Our 3×4 downspouts are manufactured in both .019 and heavy duty .024 gauge aluminum. The downspouts are packaged in standard lengths of 10’, with select 8’ and 11’ options available in .019 or .024. Other lengths of downspout available by special request, but will be subject to minimum box requirements and an additional fee. All of our downspouts are individually wrapped in paper to prevent damage in transit. - 4″ Round Downspout
- 4×5″ Downspout
Our 4×5 downspouts and elbows are manufactured from .027 gauge aluminum and come in standard 10’ lengths. Other lengths of downspout available by special request, but will be subject to minimum box requirements and an additional fee. Our 4×5 downspout spout is only packaged 6 pieces per box, while all other standard downspout is packaged 10 pieces per box. All of our downspouts are individually wrapped in paper to prevent damage in transit.
- 2×3″ Downspout
- Elbows
Our elbows are available in 2×3, 3×4, and 4×5 sizes. The 2×3 elbows are manufactured from .019 gauge aluminum, 3×4 elbows are manufactured in both .019 and heavy duty .024 gauge aluminum, and 4×5 elbows are manufactured from .027 gauge aluminum. We also carry a variety of specialty elbows including brick ledge offsets, Convert-A-bow, Kwikflips, and 45deg elbows allowing for greater flexibility with those unique applications. All elbows come individually wrapped in polybags to help protect the elbows.- 2×3″ Elbows
Our 2×3 elbows are manufactured from .019 gauge aluminum. These elbows come standard in 30 count boxes for both A-style and B-style elbows with select colors available in 50 count boxes for both A and B-style elbows. All elbows come individually wrapped in polybags to help protect the elbows. - 3×4″ Elbows
Our 3×4 elbows are manufactured in both .019 and heavy duty .024 gauge aluminum. These elbows come standard in 25 count boxes for the A-style and 20 count boxes for the B-style in both gauges. All elbows come individually wrapped in polybags to help protect the elbows. - Round Elbows
- 4×5″ Elbows
Our 4×5 elbows are manufactured from 027 gauge aluminum. These elbows come standard in 9 count boxes for both A and B-style elbows. All elbows come individually wrapped in polybags to help protect the elbows. - Offsets
Our offsets are designed to be used to get a downspout over a brick ledge, pipe, or other protrusions that are approximately 4” in size. Offsets can also be used as a header when the overhang allows. Our offsets are a 2-piece unit with one standard 45-degree A-style elbow and one 45-degree A-style elbow with a lengthened leg to complete the desired offset size. All offsets are manufactured from .019 gauge aluminum and available in 2×3 and 3×4 sizes. All elbows come individually wrapped in polybags to help protect the elbows. - Convert-A-Bow
Our unique elbow, called the Convert-A-bow, is a one-piece specialty elbow made with a B-style elbow that “converts” into an A-style opening at the crimped end of the elbow, allowing the user flexibility with applications that would require a B-style elbow but where an A-style would be preferred. The Convert-A-Bow is made from .019 gauge aluminum. All elbows come individually wrapped in polybags to help protect the elbows. - Kwik Flip Elbows
Our Kwikflip, The Hidden Hinge Elbow, is a one-piece specialty elbow that creates its own hinge. This completely assembled and ready to install elongated elbow allows raised downspout to stay in place without special clips or Velcro. Simply slip the elbow on the home’s existing downspout and screw in place same as a regular elbow and attach the appropriate length of downspout needed to disperse the water to the Kwikflip. The Kwikflip, manufactured from .019 gauge aluminum, comes in both 2×3 and 3×4 sizes for both the A and B-style applications. All elbows come individually wrapped in polybags to help protect the elbows
- 2×3″ Elbows
- Endcaps
Our endcaps are manufactured from .019 gauge aluminum and are available for 5”, 6”, and 7” gutters. The endcaps feature a deep draw for easy and secure installation using our endcap crimper (sold separately) - Fasteners
- Zip Screws
We carry several types of zip screws to cover all preferences and applications. We offer both mill finish zip screws as well as painted screws to directly match our color line. Our lineup includes #6 and #8 type heads, ½” or 3/8” size, and standard zinc or stainless steel. Installation is easy using our ¼”, 6”, or 8” nut drivers (sold separately). - Pop Rivets
Our pop rivets are 1.5” long, manufactured from aluminum, and painted to directly match our color line. Installation is easy using our pop rivet gun (sold separately). - Installation Screws
We carry a wide variety of installation screws to cover all preferences and applications. Our installation screw lineup includes zinc, ceramic, and stainless-steel options. Screw sizes from 1.5” up to 5” to cover most any applications from residential through pole barns. We offer screw head types of #9, #10, and #12 for easier installation using our ¼”, 6”, or 8” nut drivers (sold separately). - Trim Nails
Our trim nails are 1.25” long, manufactured from stainless steel, and painted to directly match our color line. Installation is easy using one of our electrician’s hammers (sold separately).
- Zip Screws
- Funnels/Diverters
Our funnels are designed for use where two downspouts come together to help control water runoff. The funnels fit either 2×3 or 3×4 sized downspout and attached with our zip screws or pop rivets (sold separately). - Gutter Brackets
We offer a wide variety of brackets/hangers for most any application. Our lineup includes options with and without clip for the back of the gutter, with and without pre-installed screws, standard as well as heavy duty, as well as several options for strap and roof hanging.- Brute®
Our Brute™ bracket, our premier hanger, is manufactured from .060 gauge aluminum with the sides formed upwards for strength and two large ribs that run the length of the bracket for increased rigidity. It measures 1 5/16 wide and is made for both 5” and 6” gutter and comes either with the back clip or without. They are formed with pre-punched holes to be used with our roof hook straps for strap hanging the gutter. The hook straps are made from .060 material and are hooked into the body of the Brute™. These brackets are intended for use with K-style gutter. - Standard Hangers
Our Standard bracket is made from .048 gauge material. The Standard bracket has the sides formed upwards to create a channeled body for strength. It measures 11/16” wide and is available in 5” only and with or without the clip on the back. These brackets are intended for K-style gutter. - Hangfast®
The Hangfast is a hidden hanger that comes with a pre-installed 3.5″ rust resistant screw with an extra deep head designed to fit K-style Gutter. The Hangfast consists of a one-piece channel-formed design with double reinforced support ribs that run the length of the bracket help to give it added strength. The Hangfast is available for both 5” and 6” gutters and comes standard with a clip for going over the back of the gutter. - Hangtite™
The Hangtite™ hanger is manufactured of heavy tempered aluminum and channel-formed for strength. The rounded front of the hanger helps roll it into place without marring or damaging the gutter. The Hangtite™ hanger has been engineered to be self-bracing at the points of greatest stress. Keyholes in the center channel allow this hanger to be used in strap hanging applications using the T-strap (sold separately). The Hangtite™ is available for both 5” and 6” gutters and comes with the option of with or without a clip for the back of the gutter. These brackets are intended for K-style gutter. - Quickscrew
Our Quickscrew bracket has a curved body shape that gives the hanger greater strength and also sports reinforcing ribs that run the entire length of the hanger. This hanger comes with a pre inserted 3″ long, 1/4 ” hex head self piercing screw with a taller head for more rapid and better tool engagement and increased tool life. The angled screw design allows the nut driver (sold separately) to clear the gutters outer edge while holding the screw tight and in the optimal position. Our Quickscrew hanger is available for 5”, 6”, and 7” gutters. The 5” and 6” Quickscrew comes with option of with or without a clip for the back of the gutter. These brackets are intended for K-style gutter. - Half Round Hangers
- Brute®
- Gutter Guard
- Drop In
Drop-In gutter guard is one of the most used gutter guards on the market. Our drop-in gutter guard is made from heavy duty .024 gauge expanded aluminum along with a reinforced front lip made from .019 gauge aluminum. A simple “drop-in” installation makes the job easy, simply place the lip of the screen onto the front of the gutter and slide it up underneath the shingles. Our drop-in has pre-notched corners for overlapping sections for a seamless appearance and install. We offer the standard hole version (1/4” holes) in 5”, 6”, 7” in mill finish. We offer the small hole version (5/32” holes) in 5”and 6” mill finish as well as a black powder coated version for 5”,6”, and 7” gutters for a sleek appearance. By using our Klynch channel (sold separately) it allows for the use of our drop-in gutter guard on any application where shingles do not exist or installing gutter guard under the shingles is not preferable. - Speed Screen
Our Speed Screen gutter guard is an all-aluminum gutter screen that requires no screws and no lifting of shingles to install. You simply place the back of the screen inside the gutter, on top of the gutter brackets, then compress to spring load the screen and snap it into place. The spring-like tension holds the screen securely in place. Speed Screen Is made from heavy duty .024 gauge expanded aluminum along with a front lip and reinforced back edge made from .019 gauge aluminum. Speed Screen has pre-notched corners for overlapping sections for a seamless appearance and install. We offer a standard hole version (1/4” holes) for 5” and 6” gutters in both mill finish and a black powder-coated option. We also offer a small hole version (5/32” holes) for 5” and 6” gutters in both mill finish and a black powder-coated option for a sleek appearance. - Extreme Screen
- EZ Lock
We carry an extensive line of the EZ-Lock expanded steel gutter protection products. All EZ-Lock products are manufactured from .028 gauge steel that is expanded and then powder-coated black for a sleek appearance and preventing rust. EZ-Lock has a wide range of hole sizes based on debris load from standard hole (5/8” X 5/16”) to small hole (9/32” X 3/16”) to micro hole (5/32” x 3/32”). We carry options for both under the shingles installations as well as on top of the brackets installations using the “compression” or “snap-in” technique. We carry options for 5”, 6”, and 7” gutters. - LeafBlaster Pro®
LeafBlaster Pro® is a stainless steel micro-mesh keeps out leaves, pine needles, and roof grit. The micro-mesh combined with an aluminum extruded frame provide the perfect amount of strength and flexibility for the ultimate gutter protection that won’t warp, crack, or rust, so you can expect protection season after season. The Z-bend technology lifts debris off the gutter guard so that it can blow off in the wind and ensures superior water flow, even in severe downpours. - Kwik Cover
Kwik Cover is designed to allow water to flow freely while debris is lifted away from gutters with a gentle breeze. Kwik Cover mount directly to the gutter to keep the guard securely in place and to eliminate the need to disturb the shingles for installation. Kwik Cover is virtually invisible from the ground. Kwik Cover is manufactured from heavy duty .024 gauge aluminum, appropriate for all roofing types, and can be installed on new or existing gutters. We offer Kwik Cover in convenient, easy-to-install 10’ sections and have made it available for both 5” and 6” gutters. - Leaf Exterminator
Leaf Exterminator is designed to allow water to flow freely while debris is lifted away from gutters with a gentle breeze. Leaf Exterminator mounts directly to the gutter to keep the guard securely in place and to eliminate the need to disturb the shingles for installation. Leaf Exterminator is virtually invisible from the ground. Leaf Exterminator is manufactured from .019 gauge aluminum and is made for 5” and 6” gutters with select colors available to directly match Lynch Aluminum’s color line - Alu-Rex
Leaf Relief’s patented design allows water to flow freely while debris is lifted away from gutters with a gentle breeze. Leaf Relief products mount directly to the gutter to keep the guard securely in place and to eliminate the need to disturb the shingles for installation. The Leaf Relief line of products are virtually invisible from the ground. We offer options for both 5” and 6” gutter with styles meant to go on existing gutters as well as options designed to be installed simultaneously with brand-new gutters. We also carry both the outside and inside Leaf Relief miters that complement the gutter guard for a seamless appearance and installation. - Leafproof®
Leafproof Gutter Protection System is a solid gutter cover designed with the patented “S” bend technology which utilizes surface tension to allow water to flow freely into the small ¼” channel while keeping out debris. Leafproof attaches to existing gutters and is installed under the first row of shingles without penetrating the roof with screws or nails. We offer both the standard Leafproof and the Leafproof XP designed for use where extreme protection is needed from high flow rainwater. Leafproof is manufactured from heavy duty .024 gauge aluminum and has a color line intended to exactly match Lynch Aluminum’s color line. We also carry the Leafproof endcaps and inside miters (both sold separately) for a consistent, seamless appearance and installation.
- Drop In
- Hinges
- Zip Hinges
The Zip Hinge is designed to flip your gutter extension vertically and out the way when needed. The Zip Hinge is designed to fit any size rectangular downspout and can be painted to match any color. The Zip Hinge is installed by attaching one side of the hinge to the downspout coming down from the gutter and attaching the other side of the hinge to the extension. The Zip Hinge is manufactured from heavy duty aluminum. - Standard Hinges
Our standard hinges are designed to attach one side of the hinge to the downspout coming down from the gutter and then attaching the other side of the hinge to the downspout extension to be able to raise and lower your extension whenever you need. These hinges are manufactured from .040 Galvanized steel and then coated with a baked-on powder coated finish. Each hinge comes with Velcro tabs to secure the extension to the downspout when it has been raised. We offer options for both A-style and B-style elbows for both 2×3 and 3×4 elbows. - Kwik Flip Elbows
Our Kwikflip, The Hidden Hinge Elbow, is a one-piece specialty elbow that creates its own hinge. This completely assembled and ready to install elongated elbow allows raised downspout to stay in place without special clips or Velcro. Simply slip the elbow on the home’s existing downspout and screw in place same as a regular elbow and attach the appropriate length of downspout needed to disperse the water to the Kwikflip. The Kwikflip, manufactured from .019 gauge aluminum, comes in both 2×3 and 3×4 sizes for both the A and B-style applications. All elbows come individually wrapped in polybags to help protect the elbows - TipLok
The TipLok is a clip that fits directly on the downspout. The gutter downspout extension is then able to be held up by the clip. The TipLok prevents damaged or flattened gutter extensions by keeping it up and out of the way. The TipLok adjusts easily on the downspout to fit any size extension. We offer TipLok for both 2×3 and 3×4 downspout. - Velcro Tab
- Zip Hinges
- Klynch Channel
- Miters
- Box Miter
Our box miters are a two-piece system manufactured from .019 gauge aluminum. Box miters attach two gutter runs at a corner, creating two seams that must be fastened and sealed using any of the high-quality gutter sealant options we offer (sold separately). We carry both the outside and inside box miters for 5” and 6” gutters. - Strip Miter
Our strip miters are a one-piece system made from heavy duty .027 gauge aluminum. Strip miters require two adjoining gutters to be cut on 45 degree angles and are preferred by contractors who only want one seam per corner. The seam is covered by the strip miter and is fastened to the gutter and sealed using any of the high-quality gutter sealant options we offer (sold separately). Strip miters are good for 90 degree corners. We carry both the outside and the inside strip miters for 5”, 6”, and select 7” gutters - Bay Miter
Our bay miters are a one-piece system made from heavy duty .027 gauge aluminum. Bay miters function in the same way as strip miters except with a 45 degree bend instead of 90 degrees. Bay miters require two adjoining gutters to be cut on 22.5 angles and are preferred by contractors who only want one seam per corner. The seam is covered by the bay miter and is fastened to the gutter and sealed using any of the high quality gutter sealant options we offer (sold separately). We carry both the outside and inside bay miters for 5”, 6”, and select 7” gutters. - Extreme Miter
The Extreme Miter gutter corner is an inside gutter miter with an extended front end. It is designed to help prevent overflowing from a roof valley in heavy rainwater conditions. The enlarged catch basin helps direct water away from the front edge and channels it through the gutter troughs to prevent overflowing. The Extreme Miter is manufactured from .019 gauge aluminum and is available for 5” gutters only.
- Box Miter
- New Products
(Page coming soon) We occasionally add new products, tools, and colors to our line. Feel free to bookmark this page and check it out every so often to see what is new for us! - Outlets
- 2×3 Outlets
We offer several different kinds of outlets, sometimes known as “cups” or “tubes”, designed to attach a 2×3 downspout to the base of the gutter. Our outlets are manufactured using heavy duty .027 gauge aluminum and come in both rectangular and round options to cover differences in preference. We also offer the Lynch Outlet Punch, the Malco outlet punch, and the hole saws to compliment the outlets, all sold separately. - 3×4 Outlets
We offer several different kinds of outlets, sometimes known as “cups” or “tubes”, designed to attach a 3×4 downspout to the base of the gutter. Our outlets are manufactured using heavy duty .027 gauge aluminum and come in rectangular, round, and oval options to cover differences in preference. We also offer the Lynch Outlet Punch, the Malco outlet punch, and several different hole saws to compliment certain outlets, all sold separately. - 4″ Round Outlet
- 4×5 Outlets
We currently offer one option of a heavy duty rectangular 4×5 outlet designed to attach a 4×5 downspout to the base of the gutter.
- 2×3 Outlets
- Paint
- Pipebands / Saddles
- Pipebands
We have several options in our line of 2×3 pipebands and saddles, often referred to as “straps” or “clips”, to give the end user a variety of ways in which to attach the downspout to the house or building. We offer a traditional style and an ornamental style of 2×3 pipebands as well as a 2×3 saddle. Our pipebands are manufactured with .019 gauge aluminum and our saddles are made from heavy duty .032 gauge aluminum. - Saddles
We have several options in our line of 3×4 pipebands and saddles, often referred to as “straps” or “clips”, to give the end user a variety of ways in which to attach the downspout to the house or building. We offer a traditional style and an ornamental style of 3×4 pipebands as well as a 3×4 saddle. Our pipebands are manufactured with .019 gauge aluminum and our saddles are made from heavy duty.032 gauge aluminum.
- Pipebands
- Roof Edge
- Sealant
We offer a well-rounded lineup of sealants for all types of preferences or gutter installations. Our product mix offers the installer many options from economy sealants all the way up to the top of the line sealants. We have products to help in all climates, conditions, specialty applications, and even different color options.- Geocel
Our line of Geocel sealants is formulated using a single-component, elastomeric, semi-leveling, high performance tripolymer designed to prevent the passage of air and moisture through small joints or seams. These sealants provide adhesion to surfaces even when damp or oily, provide ultraviolet resistance, and are paintable. - OSI
Our line of OSI sealants is composed of high quality resins and polymers, which cure to form a tough, rubbery seal. This seal expands and contracts with the change of weather and temperature without cracking. These sealants have been formulated especially for sealing aluminum gutter and downspouts. We offer both VOC and non-VOC options depending on the location of the end user. - Ruscoe
We offer a diverse line of Ruscoe sealant products. These sealants are used as an effective sealant against water, chemicals, air, and dirt for sealing seams in gutters and downspouts. These sealants have been formulated using an aluminum fortified adhesive base to incorporate the protective and elastic qualities of synthetic elastomeric formulas. We offer options of Ruscoe sealant for thin seam sealing, self-leveling sealing, and non-sag sealing applications on sloped and vertical requirements. - Ultra Silicone
Ultra Silicone is water-resistant and weather proof and ideal for non-porous materials such as aluminum siding and windows. Ultra Silicone is permanently flexible and provides for easy extrusion in any weather.
- Geocel
- Soffit
- Panels
- 12″ Soffit
We offer two different styles in our 12” line, Double-6 (Old Style) and Triple-4 (New Style). The Double-6 soffit is V-Groove style while the Triple-4 is a “U” groove style, but both utilize the “slip lock” style of installation. The Double-6 panel consists of two 6” panels while the Triple-4 consists of three 4” panels. Both are available in solid or vented options, with the vented option on Double-6 being one half of the panel and on Triple-4 being the center 4” panel only. The solid option consists of all panels being solid on both styles. Our soffit panels measure 12’ in length and are manufactured in .018 gauge material. Our soffit is packaged with paper in between each panel to prevent damage in transit. - 16″ Soffit
Our soffit offering in 16” is the Quad-4 (new style) soffit panel, consisting of four 4” panels. Quad-4 is a “U” groove style that utilizes the “slip lock” style of installation. Quad-4 carries the option of either solid or vented, with the solid option being all solid panels and the vented option being the center two 4” panels being vented. Our soffit panels measure 12’ in length and are manufactured from .018 gauge material. They are packaged with paper in between each panel to prevent damage in transit.
- 12″ Soffit
- Channel
We offer two sizes of both J-Channel and F-Channel to complement our soffit line. Both are used to secure the soffit to building. The upside-down F-Channel creates a shelf for the soffit to slide into and rest upon. J-channel is a piece designed to fit over siding and soffit pieces. It is a corner or end piece that resembles the letter J. It mounts the siding to the wall and helps hold the soffit in place. The F-channel can be easily confused with the J-channel that is used to cover the ends of the vinyl at the corners of the house and around windows. The J-Channel has one shelf and the F-channel has two. Our ½” J-channel and F-Channel fits the Double 6 soffit panel (old Style). Our ⅜ J-channel and F-Channel fits both the Triple-4 (new style) and the Quad-4 panels (new style). Both sizes of the channel measure 12’ in length and are manufactured from .018 gauge aluminum. - Fascia
Our line of pre-formed fascia is manufactured from .019 material all in 12’ sections designed to cover the facia board behind the gutter. The fascia is manufactured in the standard “L” style and has two “ribs” running the length of the material. We offer fascia in 6”, 8”, and 10” sizes. At this time, we have no woodgrain or decorative facia options available. - Roof Edge
We offer two different types of edge material, ODE Drip Edge and Style-D Roof Edge, for new construction, re-roofs, and existing roofs on residential and commercial buildings. Our edge materials are designed to direct water into the gutter system and help prevent water from backing up under the shingles. Overhanging edge material gives roof maximum protection from run-off. Our ODE Drip Edge is a 3”x2” open nose style that can be installed over existing edge while the Style-D Roof Edge is a 1.5”x3” pinched nose style intended for new construction or re-roofs.
- Panels
- Splash Guards/Valley Controller
We carry a few options to help control water on the inside roof valleys as occasionally water can overflow the gutter in these problem areas. The Barnett Valley Controller is able to prevent water from shooting over the gutter with its patented design that allows the water to enter the gutter while still allowing any debris to clear the roof area. The Barnett Valley Controller is able to be painted any color with our aerosol spray paint (sold separately). Conversely, our splash guards are a more economical way of controlling the water in the inside valley of a roof. Our splash guards are 18.75” long, manufactured from .018 gauge aluminum, and have been “scored” in the center for easy installation on top of the gutter or miter in the inside corner. - Slip Connectors
We offer a few solutions when needing to attach two pieces of gutter together using a slip connector. Slip Connectors are especially useful on extremely long runs of gutter or on applications where expansion and contraction of gutter is a concern. Slip Connectors allow some expansion and contraction with the seasons without causing the gutter to buckle under normal conditions. We offer a 5” all-aluminum option with a channel on either side to slide the two sections of gutter into to complete the joint connection. We also offer a Neoprene slip connector in both 5” and 6” options where the middle portion of the connector is made of Neoprene rubber for better expansion and contraction. - Strap Hangers
We offer many options for applications that require the gutter to be fastened to the roof. Both the Roof Hook Straps and the T-Straps are complimentary products with the Hook Straps designed for the Brute™ Bracket (sold separately) and the T-Strap designed for the Hangtite™ Bracket. The Wrap Around Hangers and the Vampire Hangers, meanwhile, are designed to be stand-alone products not requiring any additional brackets for installation.- Roof Hook Straps (for use with Brute® brackets)
Roof Hook Straps are made of .060 aluminum and are designed for use with the Brute™ bracket for applications requiring the gutter to be attached to the roof. The hook goes down through the keyhole nearest the back of the hanger and then back up through the keyhole towards the front of the hanger to “lock” in the strap. Then the hanger can be attached to the gutter and the strap can be attached to the roof. Roof Hook Straps can be used with any Brute bracket. - T-Straps (Hangtite™)
T-Straps are designed for use with the Hangtite™ bracket for applications requiring the gutter to be attached to the roof. Also known as “twist” straps or “T-bars”, the notched end is inserted into the keyhole in the Hangtite™, then turned to “lock” in the strap, from there the strap can be attached to the roof. T-Straps can be used with any Hangtite™ bracket. - Vampire Hangers
The Vampire™ T-Bar is precision stamped from .063″ aluminum. The assembly of the Vampire™ T-Bar Hanger includes a custom, strong rivet securing the strap to the hanger. The Vampire™ T-Bar is compatible with all types of seamless gutters. The installation process joins this pre-fabricated hanger to the gutter in a unique manner, which assures the strength of the final installation. The two prongs on the hanger (The Vampire™ Fangs) pierce through the back of the gutter and are bent up for permanent attachment to the gutter. The Vampire Tool is sold separately and is required for installation. The Vampire hanger is available for both 5” and 6” gutter. - Wrap Around Hanger
Wrap around hangers, similar to t straps, are used when there is no fascia to attach the gutter. The wrap around hanger goes all the way around the outside of the gutter to give the gutter the proper support in this type of application.
- Roof Hook Straps (for use with Brute® brackets)
- Tile Adapters
Our line of tile adapters provides several options when making the transition from the downspout to your drain tile. Our adapters can connect rectangular or square downspout. We carry options for 2×3, 3×4, and 4×5 downspouts designed for 3”, 4”, and 6” tiles. Our tile adapters are manufactured from injected-molded plastic. - Tools
We offer a wide variety of tools and accessories to complete any and all gutter and soffit installations.- Caulk Guns
Our caulk gun line-up includes both economical and professional options. Our entire line of tube sealant (sold separately) fits into any of the caulk guns. - Ladder Max
Ladder-Max standoffs and stabilizers protect your gutters from damage caused by ladders and tools, by keeping you a safe distance away. The Ladder-Max product line helps to protect by allowing for a more natural stance while working on your gutters, siding, or roof, and by stabilizing the ladder to virtually eliminate slide-slip. - Outlet Tools
We offer a variety of options to help with multiple sizes and styles of outlet installations. Our new Lynch Punch Kits are designed to fit with our outlets (sold separately) and are available for 2×3 rectangular, 3×4 rectangular, and 3×4 oval outlets. We also carry the Malco punch, which along with their own interchangeable accessories, allows for several different types of outlet installation. - Snips / Shears / Handhelds
We carry all types of snips, shears, riveters, crimpers, etc to give user options for any handheld installation tools needed in gutter applications. - Misc. Tools
- Caulk Guns
- Wedges
Our line of gutter wedges is designed to help level gutter when fascia boards are slanted or pitched. We carry wedges that are able to pitch the gutter from 7 degrees up to 45 degrees for greater versatility of installation. Our wedges come available for both 5” and 6” gutters with both mill finish and painted options.
- Aluminum Coil
- Gutter Machines
- Resources/Tools
- Order Online
- About Us
- Contact Us
